706

Like most metals, cast iron goes through a natural oxidation process, resulting in an outer protective coating known as rust.  This process is called Patina. Patina is a naturally occurring process and shouldn’t be confused with corrosive rust. 

The two conditions that cause cast iron to rust are:

• Moisture (Cast iron will begin to patina when the relative humidity exceeds about 64%.)
• Oxygen

Factors that accelerate rusting:

• Carbon Dioxide
• Acids
• Impurities

Like most metals, cast iron goes through a natural oxidation process, resulting in an outer protective coating known as rust. This process is called Patina.

Patina is a naturally occurring process and shouldn’t be confused with corrosive rust. Patina is good for iron as it provides a protective layer. A metals patina is a thin layer of oxides on the metal that acts to slow down further corrosion. Therefore patina on cast iron grates does not harm the structural integrity. This rust layer shields the cast iron from further oxidation. Think of rust as a corroded armour that protects against additional corrosion. This property allows iron to remain strong & intact for several decades. Unlike steel, cast iron is durable and will not flake. The patination of cast iron grates is predictable, and the duration of each stage depends on local moisture conditions, foot traffic, foreign substances etc.

Once the oxidation process begins, cast iron will turn a bright orange and then fade to a chocolate brown, similar to the colour of manhole covers.

Rust cannot be prevented but the process may be slowed by introducing a buffer material between the iron and atmosphere. Linseed oil can be applied to the grates prior to installation. Another common practice is to spray or powder coat the grates. This coating must be reapplied whenever there is chipping to maintain rust protection.

SABdrain channels are manufactured & shipped out of Italy. Grates are a mix of overseas & local suppliers.

We have over 800 distributors Australia wide. Find your nearest one here.

Alternatively, contact us & we can assist you.

Most SABdrain channels are sold in 1M lengths to be joined together. They are easily cut, allowing installers to achieve exactly how many metres they need.

Sizes above 200mm x 300mm are sold in 500mm pieces

This depends on a lot of factors such as desired aesthetic, what load class you need & where is it being installed. Check how much water the area will receive, has it got a slope? Is it near your pool? Do you live near saltwater?

Use our handy product finder or contact us.